DR-44WL firmware issue on line input levels?

Ewen Harrison

New Member
Joined
Apr 25, 2018
Messages
2
Karma
0
Hi,

Long time Tascam user, first time here. Irritating problem with my DR-44WL. I've had it for a year or two but have only recently come across this problem. Have put into Tascam support, but appreciate any views/thoughts/help.

--
Here is a video of the problem:
https://www.dropbox.com/s/j573kj38nf33nw0/tascam.mp4?dl=0

The scale for line input levels is 0 to 24. When adjusting input 3 and 4 together it is not possible to raise the input to the desired level. However, if I then switch to input 3 alone, it IS possible (the input can be raised beyond "peak"/0db). However, this is NOT possible when selecting input 4 alone. It is possible to "hack" input 4 to the desired level by first setting 3 and 4 to zero, raising input 4 alone, then adding 3 and raising both together, then selecting input 3 alone to equalise.

I've updated the firmware: 2.10 0124.

This unusual behaviour is consistent and I hope reproducible on a similar model with the same firmware installed. Appreciate your thoughts.

Best wishes,
Ewen
 

New posts

New threads

Members online