Hi guys
new to Tascam so go easy here
does anybody know how I can change the display on the Neo to Bars as opposed to the default minutes and seconds
cheers
From the manual ... "
1
Make sure the transport is stopped. You cannot perform this direct location when playing back
or recording.
2
If the “home” display is not shown, press the HOME key.
3
There is an “underline” cursor at the top of the screen. If the top left of the screen does not show
BAR (that is, it shows MTC or ABS), move the cursor under the left field, and turn the dial clockwise until BAR is shown."