Hey guys, really weird issue here.
For some reason I can't get the outputs 3, 7 and 11 to work properly. I have routed every channel to a seperate output in my DAW (channel 1 - Channel 1, 2 -2 etc) but for some reason these mentioned outputs have no sound. I have hooked up a mic to either of these channels and the signal comes into the table and into my daw, but I can't get the output to work properly.
Let's say I have a mic on input 3 and I route the output to let's say 9, the sound works properly. But as soon as I select output 3, 7 or 11 the sound is gone. Even weirder is that sometimes they DO work, but If I either turn off or reset the console the problem persist. I am really banging my head here. Also out of nowhere the desk starts to make loud noise an popping/cracking sounds. I really have no idea what to do here. I hope one of you guys can help me out here.
Thanks!
For some reason I can't get the outputs 3, 7 and 11 to work properly. I have routed every channel to a seperate output in my DAW (channel 1 - Channel 1, 2 -2 etc) but for some reason these mentioned outputs have no sound. I have hooked up a mic to either of these channels and the signal comes into the table and into my daw, but I can't get the output to work properly.
Let's say I have a mic on input 3 and I route the output to let's say 9, the sound works properly. But as soon as I select output 3, 7 or 11 the sound is gone. Even weirder is that sometimes they DO work, but If I either turn off or reset the console the problem persist. I am really banging my head here. Also out of nowhere the desk starts to make loud noise an popping/cracking sounds. I really have no idea what to do here. I hope one of you guys can help me out here.
Thanks!
