US-16x08 - DSP Settings

Discussion in 'USB PC Audio Interfaces and Control Surfaces' started by Toni Sirkiä, Jun 12, 2019.

  1. Toni Sirkiä

    Toni Sirkiä New Member

    Joined:
    Jun 2019
    Messages:
    2
    Likes:
    0
    Gear:
    TASCAM US-16x08
    So ...

    Is it a fact that you can't have the HW-DSP (EQ + Comp) enabled on more than one input simultaenously .

    Or am I missing something ?
    When I click Analog on let's just say channel 1 and then like on channel 3 the analog goes off on channel 1 .
    Case I remember correctly ...

    And yes in a some post by someone the scene-memory recalling does't not work ))):::
  2. Chickenman

    Chickenman New Member

    Joined:
    Sep 2016
    Messages:
    7
    Likes:
    0
    Gear:
    US16x08, Former 788 owner
    There are separate eq/comp for each channel.

    Click Analog 1 (for example) then click the EQ and/or COMP buttons - these activate the top settings panels for that channel specifically.

    Then you can click Analog 2 or whatever and activate eq and/or comp on that channel and set totally different settings as required.

    If you want to have an incoming signal on multi channels effected by one compressor you can only achieve that in stereo by linking the channels.