I apologize if this has been addressed before. I've checked numerous threads, and have viewed all of Phil's excellent videos - and have purchased his excellent 'How To' materials (thanks, Phil!).
I've made sure to set a 'Mark Point' of a from-to range. And tried different destination tracks. I currently have my project utilizing BAR, as opposed to ABS params. However, the appropriate range in the 'green' areas shows the appropriate range (in ABS) and is confirmed by toggling to ABS (from BAR) in the 'metronome' settings.
The range is identical.
It doesn't matter what track (stereo) I specify for the destination - and whether it does or does not contain music 'data' that already exists that I want to overwrite (COPY/INSERT or COPY/PASTE) - it just never performs the function(s). Since I never get an animated 'reel' - this may be a 'giveaway' that no operation is taking place. No error messages are indicated.
What am I missing, here? I've pored through the relevant manual pages, and nothing in Phil's excellent videos or 'How to' materials seem to cover this.
I've also left myself a 'trail of breadcrumbs' and backed up the SD card to my PC, and reloaded the project via USB ops between the DP and the PC, thinking the project was corrupted. This was confirmed, since I did another 'oops' which was corrected by reloading the project from the one on the PC back to the DP, via USB ops. I have successfully flashed the 1.11 firmware after I got the unit, about a week or week and a half ago.
Any help is greatly appreciated, guys! Thanks!
I've made sure to set a 'Mark Point' of a from-to range. And tried different destination tracks. I currently have my project utilizing BAR, as opposed to ABS params. However, the appropriate range in the 'green' areas shows the appropriate range (in ABS) and is confirmed by toggling to ABS (from BAR) in the 'metronome' settings.
The range is identical.
It doesn't matter what track (stereo) I specify for the destination - and whether it does or does not contain music 'data' that already exists that I want to overwrite (COPY/INSERT or COPY/PASTE) - it just never performs the function(s). Since I never get an animated 'reel' - this may be a 'giveaway' that no operation is taking place. No error messages are indicated.
What am I missing, here? I've pored through the relevant manual pages, and nothing in Phil's excellent videos or 'How to' materials seem to cover this.
I've also left myself a 'trail of breadcrumbs' and backed up the SD card to my PC, and reloaded the project via USB ops between the DP and the PC, thinking the project was corrupted. This was confirmed, since I did another 'oops' which was corrected by reloading the project from the one on the PC back to the DP, via USB ops. I have successfully flashed the 1.11 firmware after I got the unit, about a week or week and a half ago.
Any help is greatly appreciated, guys! Thanks!