- Joined
- Aug 27, 2021
- Messages
- 21
- Karma
- 30
- From
- Southern California
- Gear owned
- Teac 80-8, Tascam DP-03SD
OK, I'm an old studio guitarist from the 70's-90's who worked
extensively in Southern California for 20 years. I've also owned
several personal studios over the years, but I officially retired in 2005.
In 2021 after rehabbing from a stroke, I started playing again, and
decided to build a little office studio, for making demos, and cutting
tracks for family and friends. I picked up a Tascam Model 12 recently,
and I am starting a couple of backing track projects.
In the old days, I would use a couple of channels (say 1&2) as master inputs,
and simply bus them (route their signals) to be recorded over on other
channels (say 3&4) for example. My brother has a couple of Tascam DP24SDs
and he says they have a digital menu which allows you to easily move any input
to any channel you desire.
I have been searching the internet for days, and have no good answers so far.
Other than recording on one channel, and then "swapping" it to another channel.
Is there a better way to record a live signal from a particular channel. and print it on
another channel in real time, using the Tascam Model 12 as a stand-alone multitrack?
I would appreciate your guys input, and would like to finally figure out my options
related to this part of the Model 12's digital recording process.
extensively in Southern California for 20 years. I've also owned
several personal studios over the years, but I officially retired in 2005.
In 2021 after rehabbing from a stroke, I started playing again, and
decided to build a little office studio, for making demos, and cutting
tracks for family and friends. I picked up a Tascam Model 12 recently,
and I am starting a couple of backing track projects.
In the old days, I would use a couple of channels (say 1&2) as master inputs,
and simply bus them (route their signals) to be recorded over on other
channels (say 3&4) for example. My brother has a couple of Tascam DP24SDs
and he says they have a digital menu which allows you to easily move any input
to any channel you desire.
I have been searching the internet for days, and have no good answers so far.
Other than recording on one channel, and then "swapping" it to another channel.
Is there a better way to record a live signal from a particular channel. and print it on
another channel in real time, using the Tascam Model 12 as a stand-alone multitrack?
I would appreciate your guys input, and would like to finally figure out my options
related to this part of the Model 12's digital recording process.