DM-24 MMC + MTC Timecode metering

Discussion in 'TASCAM DM-24' started by William Rees, Jan 27, 2019.

  1. William Rees

    William Rees New Member

    Joined:
    Oct 2018
    Messages:
    7
    Likes:
    2
    Gear:
    DM-24 DA-88 DA-20
    Hi

    Got MMC control from the DM-24 to my Akai DR-16 no problem there

    What I would like if possible is to see the MTC time code on the meterbrige

    I have tried various things in the Timcode Sync page to get it to appear on the
    meterbridge but no luck

    Perhaps this only happens when you have a Tascam machine connected and
    control transport functions ?

    It's not a big deal as the system works to control my Akai DR-16 transport functions
    at least start-stop and that makes my DAW start stop

    It would be neat to see the bars/beats in the meterbridge tc counter is all

    Any help would be appreciated

    Thanks
  2. Ricky J Travis Sr.

    Ricky J Travis Sr. New Member

    Joined:
    Apr 2019
    Messages:
    1
    Likes:
    0
    Gear:
    Dm24, mx2424, Da30,mk202
    Good morning William,
    I have the alesis Hd24 with my dm24 and it works great. First make sure your midi ins/out cables are connected. Dm24 midi out to midi in on the Akai Dr16 and midi out from Akai Dr16 to midi in on the Dm24. On the Dm24 go to your Option-Sync page in the sync source area check the circle for MIDI in Mtc. Go to the Midi/MMC page on the Dm24 and Add MMC OPEN, change the ID#to 03 check the TRA circle under REC select 1-16. Hope this helps. Take Care
    Ricky