Hi Guys Trying to find out if anyone has experienced button issues. I 've looked in the forums for issues and or repairs but this was the only One I found. I have Dm-3200 I bought used. after doing diags these buttons failed.
My issue is this. I have 7 buttons that are not working:
1. Stereo (Right Side)
2. Mono
3. Ch 1-16 layer
4. Write
5. F1
6. F9
7. Rewind
I did a factory reset and the Stereo button and Layer buttons LEDs where lit. I pressed Aux 1 below it and it worked but when I pressed the stereo button again nothing happen. Same thing happen withe the 1-16 Layer button. Pressed 17-32 button then back and no go.
I have a feeling that the Stereo and Mono buttons are on the same buss. The same with 3-7. So I don't think the switches are bad. My first guess is that it could either be the harness, or the board assemblies. I'm just wondering if anyone else has ran into this issue.. Your help would be appreciated.
George
My issue is this. I have 7 buttons that are not working:
1. Stereo (Right Side)
2. Mono
3. Ch 1-16 layer
4. Write
5. F1
6. F9
7. Rewind
I did a factory reset and the Stereo button and Layer buttons LEDs where lit. I pressed Aux 1 below it and it worked but when I pressed the stereo button again nothing happen. Same thing happen withe the 1-16 Layer button. Pressed 17-32 button then back and no go.
I have a feeling that the Stereo and Mono buttons are on the same buss. The same with 3-7. So I don't think the switches are bad. My first guess is that it could either be the harness, or the board assemblies. I'm just wondering if anyone else has ran into this issue.. Your help would be appreciated.
George