- Joined
- Oct 4, 2015
- Messages
- 1
- Karma
- 0
- Gear owned
- DM4800
Hello Everyone
I am running a Tascam DM4800 out of two IF-AN/DM cards (Slot 1 –Slot 2) into an Avid 16 x 16 Analog interface. That Interface is running into an Avid HD Native card into a 8 core Mac Pro running Pro Tools 10HD. For some reason my mixes were only panning left no matter what I did. Then I initialized the desk in an attempt to start with a clean slate. I now have no audio monitoring yet the interface is showing audio passing through it & Pro Tools is playing. Any insight on the correct routing would be greatly appreciated. Please note I previously ran the fire wire card & the system worked flawlessly.
Thanks!
I am running a Tascam DM4800 out of two IF-AN/DM cards (Slot 1 –Slot 2) into an Avid 16 x 16 Analog interface. That Interface is running into an Avid HD Native card into a 8 core Mac Pro running Pro Tools 10HD. For some reason my mixes were only panning left no matter what I did. Then I initialized the desk in an attempt to start with a clean slate. I now have no audio monitoring yet the interface is showing audio passing through it & Pro Tools is playing. Any insight on the correct routing would be greatly appreciated. Please note I previously ran the fire wire card & the system worked flawlessly.
Thanks!