- Joined
- Mar 21, 2015
- Messages
- 28
- Karma
- 7
- Gear owned
- DM-4800
HELP!!! I don’t think my Logic Pro X plug-ins are working properly. When I click Logic Pro X > Preferences > Plug-In Manager, the pop-up window tells me that all Manufacturers have been “successfully validated” under “Compatibility”, and the check mark under “Use” is bright, except the Logic plug-ins. There is nothing showing under “Compatibility” for Logic, and the check marks look greyed out. Is this normal? If not, any suggestions on how to cure this issue?
I have tried “Restore Default Settings” in the “Plug-In Manager” window, but it didn’t seem to change anything. And, I have tried the “Reset and Rescan Selection” button, but no change—just a new pop-up window (Audio Unit Validation Result), but nothing happens. EXCEPT… my Tascam DM-4800 shows a scrolling message in the “Remote” screen, and the lights around the “Pan” knob move around the knob.
I am using OS X 10.9.5, Logic Pro X 10.2.0, and a Tascam DM-4800 DAW controller that is completely updated.
Thank you for any and all suggestions.
I have tried “Restore Default Settings” in the “Plug-In Manager” window, but it didn’t seem to change anything. And, I have tried the “Reset and Rescan Selection” button, but no change—just a new pop-up window (Audio Unit Validation Result), but nothing happens. EXCEPT… my Tascam DM-4800 shows a scrolling message in the “Remote” screen, and the lights around the “Pan” knob move around the knob.
I am using OS X 10.9.5, Logic Pro X 10.2.0, and a Tascam DM-4800 DAW controller that is completely updated.
Thank you for any and all suggestions.