Hello All,
After searching the internet search engines and this forum:
I have a DP-01 on both mic inputs the phantom power has blown a fuse or capacitator.
With the switch of phantom power off the inputs work great as well on mic level as the 1st on guitar.
As a work around I use the Phantom power ports of a 12/2 mixer en connect the inserts to the DP-01, but I would prefer for the smaller settings also due to COVID19 for the DP-01 with no aditional hardware and the condenser mic's directly in it.
I have opened the unit due that here in the Netherlands I don't know any (good) Tascam service points and somewhere years ago I got an electrical engineer study
I can not find any cap's that are swolen, measured the LC, and RC's but couldn't find an abvious point that could be the problem.
Would anyone happen to know where I should look at, or does anyone have service schematics etc?
Yes I know it's an oldy by know, but I can read and write with it
Thank you all in advance. Regards Stefan
After searching the internet search engines and this forum:
I have a DP-01 on both mic inputs the phantom power has blown a fuse or capacitator.
With the switch of phantom power off the inputs work great as well on mic level as the 1st on guitar.
As a work around I use the Phantom power ports of a 12/2 mixer en connect the inserts to the DP-01, but I would prefer for the smaller settings also due to COVID19 for the DP-01 with no aditional hardware and the condenser mic's directly in it.
I have opened the unit due that here in the Netherlands I don't know any (good) Tascam service points and somewhere years ago I got an electrical engineer study
I can not find any cap's that are swolen, measured the LC, and RC's but couldn't find an abvious point that could be the problem.
Would anyone happen to know where I should look at, or does anyone have service schematics etc?
Yes I know it's an oldy by know, but I can read and write with it
Thank you all in advance. Regards Stefan
