DR680MkI: Phantom on inputs in LINE mode?

[readymedia]

Hey, there!

I need three MIC Inputs with Phantom Power and three LINE Inputs withOUT Phantom power on my DR680MkI. If I use the Inputs like this, will be Phantom Power provided to Line Ins?

Phantom on Inputs 3 and 4 ON!
Input3: MIC mode - Phantom on Input 3, right?
Input4: LINE mode - No phantom Power on Input 4... I'm not sure.

Cheers, Andreas

 

[readymedia]

I just have measured the voltage with a multimeter. So there is always 48V phantom power on Cold and Hot if 48V is switched on. Change the input from MIC to LINE (there are also two different Amps in DR680 for LINE and MIC on each channel) does not disconnect the phantom power on corresponding inputs.