PC Sound Output to Mixer Input

[Richard Siena]

I have a Tascam model 24. I want to take the sound output from multiple PC's sound output 3.5 mm jack and connect it to a mixer channel of the Tascam.

How would you suggest I do that? Is the audio out from a PC considered line in or will doing that damage the mixer?

I have one PC connected to channel 21/22 using the 3.5 mm jack but what is the best way to connect another one to the mixer?

thanks for your help.

Rich

 

[Blue Monster 65]

Keep your volume on the PC down and run into the line inputs (you'll probably want a splitter for the stereo channels). As long as you don't distort the input by sending too hot (loud) of a signal in, you should be OK.

 

[Richard Siena]

Thanks

 

[Blue Monster 65]

You’re welcome - let us know how it works out.

 

[Richard Siena]

The setup worked perfectly. I can put multiple pc's outputs to the input of the channels and mix them in as needed. In this case, what I am doing is feeding the mix into an Atem mini and the mini has a channel for each of the outputs of the pc's.

thanks again it was a big help

rich

 

[Blue Monster 65]

Glad to hear it!