Removing Tascam 58 Pinch Roller

Discussion in 'TASCAM DIY Repairs and Mods' started by ravachol, Oct 1, 2014.

  1. ravachol

    ravachol New Member

    Joined:
    Oct 2014
    Messages:
    1
    Likes:
    0
    Gear:
    58
    According to the manual, one need only remove the retaining screw..... yet, the assembly doesn't seem to want to budge.

    I've tried to dislodge the bearing but it's terribly inaccessible -- I was using a thin palette knife, pulling up around the edges. Any suggestions would be most welcome. Cheers!
    Last edited: Oct 22, 2014