Reverb Over bleed

Discussion in '2488 and DP-24/32 Digital Portastudios' started by Jeff Taylor, Mar 2, 2021.

  1. Jeff Taylor

    Jeff Taylor New Member

    Joined:
    Mar 2021
    Messages:
    3
    Likes:
    1
    Gear:
    DP-24SD, DP-008EX
    What am I doing wrong that I get so much overbleed from Reverb. Specifically, I set each fader's mix with the reverb needed for each track. But they all seem to bleed over onto every other track. For example, I can pull a fader back to infinity but I still hear that track's reverb in the LR master unless I mute that channel entirely. Is that the way it's supposed to be?
  2. -mjk-

    -mjk- Moderator Staff Member

    Joined:
    Oct 2018
    Messages:
    2,144
    Likes:
    1,240
    From:
    Hukou Township, Hsinchu County, Taiwan
    Gear:
    DP-32, | 2A Mixer, A3440
    It sounds like you have your Sends set to Pre and not Post. If so, then yes, the device is operating properly. But I think what you want is for the Send to be Post fader so it remains relative to the fader level.
  3. Jeff Taylor

    Jeff Taylor New Member

    Joined:
    Mar 2021
    Messages:
    3
    Likes:
    1
    Gear:
    DP-24SD, DP-008EX
    Ah! Doing live sound, I always wanted it prefader! That makes sense! Thanks!
    -mjk- likes this.