- Joined
- Jul 9, 2016
- Messages
- 104
- Karma
- 38
- Gear owned
- Dp 24 sd
This Q is not only a technical Q about the DP24 SD, but also about mixing in general I guess. When I want to add reverb at mixdown I first set a reverb and then assign one or more channels to it, no problem. The level (amount) of reverb can now be set at three places. First in the reverb itself ("Return" in the Effect/Reverb), then in the mixer for each track there is both a SEND EFF 1 level and a SEND MASTER 1 level.
What I have done is to set SEND EFF 1 and SEND MASTER 1 to 127, and then adjusted with "Return". I guess my Q is if there is a correct way to do this. Or if the result would differ if it is done any other way?
What I have done is to set SEND EFF 1 and SEND MASTER 1 to 127, and then adjusted with "Return". I guess my Q is if there is a correct way to do this. Or if the result would differ if it is done any other way?