Tascam Model 24 -> Studio One 4 - Clicks and pops

Discussion in 'Model 24/16/12' started by ChipBurns, Aug 6, 2020.

  1. ChipBurns

    ChipBurns New Member

    Joined:
    May 2020
    Messages:
    2
    Likes:
    0
    Gear:
    Model 16
    I'm migrating from a Tascam Model 24 to Presonus Studio One v4. Almost all my tracks have clicks and pops in Studio One that were not present on the Tascam.

    All tracks are 48/24 on both machines.

    Any ideas what I'm doing wrong?
  2. -mjk-

    -mjk- Moderator Staff Member

    Joined:
    Oct 2018
    Messages:
    1,505
    Likes:
    746
    From:
    Hukou Township, Hsinchu County, Taiwan
    Gear:
    DP-32, | 2A Mixer, A3440
    hi @ChipBurns and welcome to the Tascam Forums.

    OK, you are migrating. Is this a brand new install and setup of the DAW? If so, have you done recordings on the DAW previous to importing the Model 24 tracks? If not, try to record something in the DAW to establish that the clicks are not there when recording to the DAW.

    How hot are the tracks recorded in the Model 24?

    Are the proper ASIO drivers installed?

    Quite a number of things can cause pops and clicks in computer audio. It's really impossible to just give you the answer. You have to troubleshoot it.