Tascam series 208i monitor balance knob

Discussion in 'USB PC Audio Interfaces and Control Surfaces' started by Guillermo, Apr 29, 2021.

  1. Guillermo

    Guillermo New Member

    Joined:
    Apr 2021
    Messages:
    1
    Likes:
    0
    Gear:
    TASCAM Series 208i USB Au
    Hey guys, i started having issues with the balance knob a few weeks ago. turning the knob from input to monitor has no affect while recording and listen to the audio on my headphones. before i could lower the music play back from my DAW (Studio One) while having my vocal mic louder to record. i hope it makes sense.


    I'm thinking maybe my panel settings are wrong in the routing page.

    currently i have computer 1 and computer 2 in the line out 1 and 2.
    when i tried changing it to master or input, i get no sound during playback from the DAW software or Desktop, youtube etc.

    Any help would be appreciated
  2. Alex_P

    Alex_P New Member

    Joined:
    Sep 2021
    Messages:
    1
    Likes:
    0
    Gear:
    Series 208
    Hi Guillermo! I wonder if you have fixed it? I got similar problem with just-out-the-box device. It looks like DAW stream is not getting to stereo bus and master L and R outputs, though it can be heard on Computer 1 and 2 outputs.