- Joined
- Feb 5, 2015
- Messages
- 41
- Karma
- 14
- Gear owned
- DM-3200
My DM4800 arrived last week, and I've been busy building a console to house this monster.
Thought I'd share the process / results. I have a sketchup file I'll upload as well in case it might help anyone else out. (Though not all of the measurements in the sketch up are exact).
All in all had about $150 in parts and 20-30 hours of labor into it.
3/4" MDF, joined with glue / dowels. The legs are just regular 2x4s with 2" dowels for the risers.
Looking forward to getting cabled up and digging in to the board!
Thought I'd share the process / results. I have a sketchup file I'll upload as well in case it might help anyone else out. (Though not all of the measurements in the sketch up are exact).
All in all had about $150 in parts and 20-30 hours of labor into it.
3/4" MDF, joined with glue / dowels. The legs are just regular 2x4s with 2" dowels for the risers.
Looking forward to getting cabled up and digging in to the board!