Hello.
My connection looks like this:
Neumann U87 -> Focusrite ISA One -> Apollo Twin MK2 DUO.
Tascam DM-3200 IF-FW/DMMKII is connected as a Logic Pro X controller.
I would like to start using the DM-3200 also as an external effects processor.
I am sending a signal from ISA One by SEND OUTPUT to LINE-IN INPUT on DM-3200 CH1 and back from DM-3200 CH1 by INSERT OUTPUT to RETURN INPUT in ISA One.
After pressing the INSERT button on ISA One, the signal goes through the mixer, goes back to the preamplifier and I can record it by Apollo Twin in Logic.
Unfortunately I can not edit the signal with Tascam. I can not change the volume with the fader. I can not use effects from Tascam. Signal goes through the mixer, i can hear it on monitors, but the mixer does not show any signal on the display. The signal only reacts to trim and I can record it without any problem, but without the mixer effects.
This is my first post in this forum.
My english is not the best, so I hope everything is understandable.
Please help me.
My connection looks like this:
Neumann U87 -> Focusrite ISA One -> Apollo Twin MK2 DUO.
Tascam DM-3200 IF-FW/DMMKII is connected as a Logic Pro X controller.
I would like to start using the DM-3200 also as an external effects processor.
I am sending a signal from ISA One by SEND OUTPUT to LINE-IN INPUT on DM-3200 CH1 and back from DM-3200 CH1 by INSERT OUTPUT to RETURN INPUT in ISA One.
After pressing the INSERT button on ISA One, the signal goes through the mixer, goes back to the preamplifier and I can record it by Apollo Twin in Logic.
Unfortunately I can not edit the signal with Tascam. I can not change the volume with the fader. I can not use effects from Tascam. Signal goes through the mixer, i can hear it on monitors, but the mixer does not show any signal on the display. The signal only reacts to trim and I can record it without any problem, but without the mixer effects.
This is my first post in this forum.
My english is not the best, so I hope everything is understandable.
Please help me.