24sd Sound on

[Jonwoode]

Hello,

I have just bought a brand new DP-24sd, although I have been using most of the dp range over the last 20 years.
I am familiar with most of the settings so it seems fairly straightforward.

The problem I have is:
When I connect a mic to an input, press phantom power (condenser mic), put the main stereo level up and the monitor (headphones) volume up, I can already hear the sound before I put the track level up and press the rec button.

In the manual it says you shouldn't be able to hear anything before pressing the rec button, which is what I have been used to with other dp machines.

Any advice would be great

Thanks

Jon

 

[-mjk-]

Check your routing. If the input channel is on the Stereo bus you'll hear it with all the track faders down and the Stereo fader up.