I have MixBox CS (free edition) and I use it with iPad GarageBand, and think it’ll be great for external effects for mixing and mastering on the Model 12.
I've seen mention of people already doing this - but seemingly taking the signal from the Tascam aux outputs and then going into MixBox via a separate audio interface and returning audio to separate Tascam input jacks.
Is it also possible to connect a device running MixBox (e.g. iPad) to Tascam as an interface and route the effects return all in the digital/USB domain?
There are some routing challenges but hopefully this could be a powerful combination..
(I'm planning to upgrade to the full MixBox CS regardless of whether I can integrate with the Tascam though..)
I've seen mention of people already doing this - but seemingly taking the signal from the Tascam aux outputs and then going into MixBox via a separate audio interface and returning audio to separate Tascam input jacks.
Is it also possible to connect a device running MixBox (e.g. iPad) to Tascam as an interface and route the effects return all in the digital/USB domain?
There are some routing challenges but hopefully this could be a powerful combination..
(I'm planning to upgrade to the full MixBox CS regardless of whether I can integrate with the Tascam though..)
