Cubase Pro12 MTC

With Cubase Pro12 I can't seem to find how to MTC to display on Dm4800.
This is on windows 10.
Thank you!

Is this what you are referring to:

https://xz1kefb.sharing.bublup.com/...id=001-i-9bbf3f38-ce8f-4df1-8d1b-5bff9c1e7cc2

Yes!!

What am I missing, can't get timecode to display on DM

I did see your earlier response to me. I will do my best to provide you with some screenshots and instructions at some point today. Unfortunately, I am unable to that at this very moment.

Hint for the moment. Look at this TM Companion documentation

https://tascam.com/downloads/tascam/34/TMC_Software_Guide_E.pdf

Thank you for your help.
I can get timecode to display from all my other daws, it is only cubase 12 I can't get to display on the DM.

So, basically you are good to go on the mixer side of things, right?

https://flic.kr/p/2kGmVqu

Also came across something tha I posted back in 2021.

https://flic.kr/p/2mbhZTy

Tell me about your MIDI setup

Yes,
I'm not home now so I can't check anything, but I am missing something in Cubase.

A little more info that I am hoping will be useful

https://mega.nz/folder/p443mLAA#vHeoxdJF4AObD997vG54xw