DM3200 Send to Buss Pre Fader

Discussion in 'TASCAM DM-3200 & DM-4800' started by Richard Lockett, Sep 8, 2021.

  1. Richard Lockett

    Richard Lockett New Member

    Joined:
    Jul 2020
    Messages:
    7
    Likes:
    0
    Gear:
    DM3200 MU1000
    Hi guys, hope one of you can help!

    I would like to be able to send my input signal to a buss using the buss assign button pre-fader. This would allow me to monitor via the input channel fader without changes at this point effecting the level send to the buss and to use the buss fader to adjust the send level to adat (I have this assignment in place) and on via adat to my DAW.

    I hope this question makes sense!

    Thanks in advance!