Hi, I'm a new member. Thank you for considering this question/problem. Please advise me if I have posted this incorrectly or in the wrong area of forum.
I'm using a TASCAM DR-40:
When I turn the Ext In switch to Mic + phantom setting, I get a message on screen that says Phantom on Are you sure? Enter Yes.
(At this point-- There are no other options; the left and right buttons do nothing).
Then When I press enter (the only option), after a second, the DR40 turns off (with a clicking sound).
I tried resetting. Also updated firmware. Same problem. Happens when the recorder is off and I put it in the Mic + phantom mode and then turn it on. Also when it is on and I switch it to that setting. It doesn't matter if a mic is plugged in or not.
What do you suggest?
Thank you,
Keith in Oregon
I'm using a TASCAM DR-40:
When I turn the Ext In switch to Mic + phantom setting, I get a message on screen that says Phantom on Are you sure? Enter Yes.
(At this point-- There are no other options; the left and right buttons do nothing).
Then When I press enter (the only option), after a second, the DR40 turns off (with a clicking sound).
I tried resetting. Also updated firmware. Same problem. Happens when the recorder is off and I put it in the Mic + phantom mode and then turn it on. Also when it is on and I switch it to that setting. It doesn't matter if a mic is plugged in or not.
What do you suggest?
Thank you,
Keith in Oregon
Last edited: