How do I connect the dm-24 to a motu 2408 mkII?

Discussion in 'TASCAM DM-24' started by Javy-fonola, Jun 25, 2017.

  1. Javy-fonola

    Javy-fonola New Member

    Joined:
    Jun 2017
    Messages:
    1
    Likes:
    0
    Gear:
    DM-24
    Hi, I'm new to the forum and the world of digital audio. I am from Argentina and I am using a translator to reach English so I apologize if it is not perfect.
    I am using a Motu 2408 mkII connected by its 324 pci running windows xp (soon it will happen to win 7). What I need to know is how to connect the DM-24 to use the 16 microphone inputs and record them in Nuendo or Cubase in a multitrack way. I hope you can understand me and help me solve the problem. Thank you very much and greetings from Bs As.
  2. BLIZZY1BLIZZY

    BLIZZY1BLIZZY New Member

    Joined:
    Sep 2012
    Messages:
    90
    Likes:
    23
    Gear:
    DM3200 DM24
    attached your ADAT optical from the MOTU2408 (out) into the DM24 (in) and vice versa

    Then change DM to ADAT, set your routing, so that you can record directly into your DAW

    DM 1-16 ADAT/M-L In
    Nuendo 1-16, set to receive on 1-16 via adat optical from the DM
    elephant studios likes this.
  3. elephant studios

    elephant studios New Member

    Joined:
    Dec 2015
    Messages:
    13
    Likes:
    1
    Gear:
    tascam dm 3200
    and dont forget to choose the ADAT as your input and output in your DAW , and on the Tascam dm 24 you have to change your inputs and outputs to ADAT , hope this helps