When I use Model 12 to record audio (into Logic), I am not getting any Main Out or Channel Fader action. All of the output is coming from the Channel Gain knob only.
The E.Q. for each channel IS working, but the sound is not being routed through the Main Out or picking up the Channel Fader info. They are inoperative.
Of course, this gives very little control over the output, as it is just raw volume out of the Model 12 through the Channel Gain knob. Of course, I am directing the signal through the outputs and it should be routed through the main outs and the channel faders should definitely be working. So, I am stumped.
I am wondering if this is a simple, dumb setting I am missing.
It came out of the blue, like a lot of things that have cropped up with this board. It feels really temperamental. I have had to do "factory resets" a few times because weird errors like this that have happened before. I also did it in this case and it changed nothing.
The E.Q. for each channel IS working, but the sound is not being routed through the Main Out or picking up the Channel Fader info. They are inoperative.
Of course, this gives very little control over the output, as it is just raw volume out of the Model 12 through the Channel Gain knob. Of course, I am directing the signal through the outputs and it should be routed through the main outs and the channel faders should definitely be working. So, I am stumped.
I am wondering if this is a simple, dumb setting I am missing.
It came out of the blue, like a lot of things that have cropped up with this board. It feels really temperamental. I have had to do "factory resets" a few times because weird errors like this that have happened before. I also did it in this case and it changed nothing.
