Reason 6.5 's buffer problm when using with Tascam DM 4800

prathumusic

New Member
Joined
Oct 21, 2012
Messages
16
Karma
0
From
Rajapalayam,Tamil Nadu,India..
Website
www.facebook.com
Gear owned
Tascam DM 4800
Reason 6.5 's buffer wont change when using with Tascam DM 4800 ,Firewire ASIO card... :confused: .. it keeps returning to 1024 samples both in reason 6.5 and on the tascam dm 4800's control panel... :(

can someone help ????? :|

Thanks,
Prathap Norman :ugeek:
 
Re: Reason 6.5 's buffer problm when using with Tascam DM 48

Try this:

Boot up your PC, then open the Firewire control menu. Choose the desired buffer setting - say - 256. Exit the application.

Shut down PC and reboot (cold boot not ReStart). Again, open the FW control menu to see if your [256] buffer setting remains. If so, open Reason. Then check Reason's device (or whatever it's called) menu; if [256] is shown, you're good to go. If you get an error message ("ASIO has changed, close program}, exit Reason then reopen it.

If that doesn't help, the next thing is to adjust your FireWire settings to run in 'Safe Mode 1." It could be your PC's system isn't capable of running small buffers in a stable environment.

Finally, if that, too, doesn't solve the problem, it could very well be Reason isn't happy with anything less than 1024 samples, and you'll have to live with the latency.

CaptDan
 
Re: Reason 6.5 's buffer problm when using with Tascam DM 48

Running in "safe mode 1" worked perfect... thanks ... ;)
 

New posts

New threads

Members online

No members online now.