Tascam 38 Odd inputs work, even inputs don't

Discussion in 'TASCAM DIY Repairs and Mods' started by Calzone, Feb 27, 2021.

  1. Calzone

    Calzone New Member

    Joined:
    Feb 2021
    Messages:
    11
    Likes:
    1
    Gear:
    Tascam 38
    Hi There, I'm just getting back to looking at the relay situation. I ordered a couple of the SYNC/REPRO relays you recommended, but I get output from both heads, so I'm thinking the problem is the record relay, metal can (24V G2V-2??) since that channel just doesn't record. It used to, but not now. I'll remove it from the board and see if I can get it apart to check and clean the contacts. I can find it in the schematics and in the parts list with the service guide. I'll let you know how I make out. thanks again.
  2. Calzone

    Calzone New Member

    Joined:
    Feb 2021
    Messages:
    11
    Likes:
    1
    Gear:
    Tascam 38
    Any recommended replacement relay for G2V-2?
  3. SkywaveTDR

    SkywaveTDR Well-Known Member

    Joined:
    Feb 2014
    Messages:
    1,068
    Likes:
    222
    From:
    Chicago area
    Gear:
    Teac, Tascam, Sony
    I have used the G6A-234P and other used a cheaper on which is taller but the G6A is for low signal switching and the other is not.