Tascam DA-3000 as an ADC

[pend1711]

I have been getting decent results from using a Cyp AU-D4 ADC with my turntable. Sending the coaxial from the adc to my cd player that can up sample. The results are pretty good.

As I understand it the DA-3000 can also act as an ADC and I would assume is a better one than the Cyp.

I have connected the turntable/phono stage via XLR analog cables to the DA-3000 XLR balanced inputs, and have the coaxial out from the DA-3000 to my cd player. All seems ok, I can see the line in levels appearing on the Tascam so know it is receiving the music ok. However, I cannot get any sound out of the coaxial or AES connection to my cd player.

I think I have ensured the settings in the Tascam are ok -
ADDA, to on
Analog in, to Balanced
Digi In, to AES/EBU

Have I made a mistake with the above settings or am I missing something else.

Thanks
Andrew

 

[Mark Richards]

Sorry, wish I could help, but you're not very likely to attract the attention of anyone familiar with your DA-3000 in this "Model 24/16/12" Front-of-House mixer/multitrack recorder subforum.

Since the DA-3000 is a discontinued tool designed to make very high resolution stereo PCM/DSD recordings to archive masters, I searched the site and found this subforum that seems a more likely place for your question.
DV-RA1000 and DV-RA1000HD Recorders (High-resolution audio master recorders)
(www.tascamforums.com/forums/dv-ra1000-and-dv-ra1000hd-recorders.34/)

 

[pend1711]

Thanks

 

[pend1711]

Re-posted in another part of forum