DOES A DM-3200 fader board 1 is compatible as the second fader board in a DM-4800

[Bowie]

Hello.

I have a DM-4800 with fader nr 14 getting sticky and slow.

I have tried tuner 600 spray and compressed air with no luck.

The fader feels like it´s mechanical wear or damage.
All other faders work fine.

I have found a DM-3200 for parts sales.

My question is will fader board 1-8 from the DM-3200 align with the midi send and receive messages as i installed it as second fader board 9-16 in my DM-4800?

Any help would be welcome.

Thank you

I have foun

 

[Herve QUEVAL]

Hi Bowie,
On DM-4800, fader 1-8 and 9-16 use same board as fader 1-8 on DM-3200
PCB Fader FE8 - CI E901641-00A ( I have cheked the service manual) for me same hardware even if part list are same with G suffix for DM-4800.
for me you can swap.

The problem you have could be hardware failure on electronic side (not fader mechanic itself).
Changing the board is a good solution.

 

[Bowie]

Thank you for checking!
But i stil don´t know if the midi messages send abd receive will align from 3200 board 1-8 if installed in my 4800 as sevond board 9-16.

I use the remote controll daily.


Thanks agzin

 

[Glantz Media]

Never use tuner spray on faders! Caig DeoxIT, a special spay for this... DeoxiT Fader F5 and Fader grease.