help with iF-AN/DM analog card setup

robbie

New Member
Joined
Apr 27, 2013
Messages
3
Karma
0
I am in need of basic setup help with the IF AN/DM card for use with sonar x1 external insert plugin. I also already have the firewire card already installed in my DM4800 and it is working properly , also the analog card is installed in slot 2 and is recognized by the Dm4800.
 
Basic idea on using DM's I/O for DAW's extrenal F/X (external insert plugins) is to create INPUT BYPASS ROUTING from your DAW connetcion to DM's output and then INPUT BYPASS ROUTING from DM's input to your DAW connection.

In your case (X here represents an unused channel of your IF-W/DM):
SLOT1 chX -> INPUT BYPASS -> SLOT2 ch1
SLOT1 chX+1 -> INPUT BYPASS -> SLOT2 ch2
etc
and
SLOT2 ch1 -> INPUT BYPASS -> SLOT1 chX
SLOT2 ch2 -> INPUT BYPASS -> SLOT1 chX+1
etc

Now you can define input/outputX, X+1, etc as external F/X in your DAW.
 
Thanks for the quick response, I will try and let you know the outcome. Again thank you.
 
Hi, I got my hardware connect to my DM and working fine.I was curious to know if it's possible to route my onboard TC and Tascam effects into sonar x1
 

New posts

New threads

Members online

No members online now.