Hey there, I couldn't find a solution through search engines so I'm going to make a post here on providing a possible solution to those who have been experiencing an issue with the TASCAM US-366 after upgrading to Windows 10.
After about 2 hours of use, all audio going in or coming out of the TASCAM USB interface would not be working. In order to solve the issue short term, one would have to unplug and plug it back in. It turns out Windows 10 has power-saving on USB ports by default.
To resolve the issue, go to Device Manager > Universal Serial Bus Controllers > (right-click select the USB hub) > Properties > Power Management > (uncheck "Allow the computer to turn off this device to save power")
Do this for as many USB hubs are listed on the device manager. I was literally about to buy a new interface because of this frustration, I'm glad I stuck with it and am staying with the TASCAM family and I hope you do too.
After about 2 hours of use, all audio going in or coming out of the TASCAM USB interface would not be working. In order to solve the issue short term, one would have to unplug and plug it back in. It turns out Windows 10 has power-saving on USB ports by default.
To resolve the issue, go to Device Manager > Universal Serial Bus Controllers > (right-click select the USB hub) > Properties > Power Management > (uncheck "Allow the computer to turn off this device to save power")
Do this for as many USB hubs are listed on the device manager. I was literally about to buy a new interface because of this frustration, I'm glad I stuck with it and am staying with the TASCAM family and I hope you do too.